Nethan Vines

Pay close attention to the angle of each string in relation to the tailpiece. The tailpiece should be adjusted so the strings never touch the rear edge of the Tune-o-matic. Contact here can cause tuning problems, so all the strings need to clear the bridge frame. You must have the genuine guitar spare parts to replace any like, wraparound bridge , custom guitar tailpiece , etc.  When the tailpiece is adjusted, I finish filing the string slots. This involves carefully sloping down the back of the slots to allow each string to follow its natural angle as it emerges from the tailpiece to the point where it contacts the saddle. Adjusting intonation. The final step is to intonate the guitar by moving the new saddles forward or backward in the bridge to shorten or lengthen the vibrating portion of the string. The saddle-intonation adjustment screw is located at the rear of the bridge, and the idea is to move each saddle forward (by turning the screw counterclockwise) or backward...

I've been a guitar player for decades but only recently became serious about working on my instruments. In my research, I’ve found hundreds of articles about instrument repair, and while many are fantastic and chock full of information that’s invaluable to musicians, a lot is impractical or requires more space or specialized tools than most of us have. Plus, some repairs, such as fretwork, nut replacement, under-saddle pickup installation and finish repairs are best left to professionals. This isn’t to say you shouldn’t work on your own guitars, only that you should know your limits, which in many instances are related to having the right tools. What I found most challenging when getting started was knowing what tools I should buy, and which were not worth the money based on my skill level. From trial and error, I found what some repairs were simple and small-space friendly. Any of the repairs discussed can be done with just a clean and level space. All of these techniques w...

While there are many different types of bridges used on imported guitars, such as separate bridge and stop tailpiece, separate bridge and trapeze tailpiece, wraparound (bridge and tailpiece as one unit), rosewood block, etc., the majority of guitars use a separate bridge and stop tailpiece, as used on most Les Pauls, 335s, etc. In this section, we will concentrate on that particular setup. Get guitar tailpiece parts at FaberUSA. OTHER PARTS In addition to replacement bridges, other parts to consider upgrading on imported guitars are: Tailpiece: our 100% lightweight aluminum  TP-59 stop tailpiece  – much lighter than the stock tailpiece and provides a more “woody” and vintage tone Tailpiece bushings: our metric  Steel Tailpiece Bushings  provide much improved tone transfer over the stock “pot metal” bushings “Vintage Steel” tailpiece studs: our  “Vintage Steel” Tailpiece Studs  replace the standard tone robbing, non-locking tailpiece studs ...

Wondering how guitarists play so quickly across strings without making any errors and you still struggling to play the scales at a good speed? Well, it is an aggressive task and you need to push your boundaries to  learn guitar   of such a level.   You should also have a clear understanding of the guitar parts. It’s good to know  guitar parts  to play the instrument well.  First, begin with picking across strings and then learn alternate picking which is used by the players extensively. It is an amazing way to play intense runs that sounds amazing. There is no other technique like this one.  So, this is how you can master a picking run. Also, make sure that all the guitar parts are in proper condition else the guitar will not sound good. You can go for  guitar spare parts online  if you need to replace the old ones to keep your guitar in playable condition. Choose a reputed guitar parts supplier online and fix your guitar before ...

As the guitar player progresses with learning, he or she would need to update the guitar because of the expectations or needs of the instrument change. You can spruce up your guitar and enhance its playability. You will be able to improve the look of the guitar and give better performances as well. Why Go For Original Parts? Even if there are two guitars of the same make and model, year and finish they can vary drastically. They vary in terms of price and present condition. Those who are serious collectors care a lot about this thing face and challenges to replace the parts of a particular model. Design guitars are highly modular instruments and guitarists are known as tinkerers by nature. It means that most of the Vintage Gibson guitar parts will have such replacement parts that did not come out of the factory. For example, Tuning pegs, bridges , nuts, control knobs, potentiometers, pickups and a lot more. It decreases the value for collectors. For cornerstone vintage models...