The Ultimate Guide to Upgrading Your Guitar With Faber Parts

The process of upgrading is a fun experience that can enhance the sound quality, feel, and overall enjoyment of playing the guitar. Faber USA was established with the objective of offering uniquely, precision-made guitar parts and accessories suitable for both domestic as well as imported guitars. This step-by-step guide will explain how you can upgrade your guitar with Faber parts, so you can experience the best out of your guitar.

Choosing the Right Saddles

There are few decisions that you make about your guitar that are as significant for its tonal properties and its feel as bridge saddles. This is why you need to upgrade guitar bridge saddles. It has been found that the replacement of low-quality saddles with better-quality ones improves the efficiency of the instrument in terms of tone, sustain, and intonation.

Tune-O-Matic Bridges: Common on many Gibson-style guitars, tune o matic bridge type features adjustable saddles that allow players to fine-tune the intonation and action. They offer a good balance between sustainability and adjustability.
Enhancing Import Guitars with Faber Parts

For many guitarists, upgrading import guitars can feel daunting, but Faber parts offer a practical solution to enhance performance and achieve a professional-level sound. Faber bridge systems can improve sustain, intonation, and tuning stability, while guitar tailpiece enhance string alignment and overall resonance. Installing Faber locking tuners can significantly improve tuning stability, especially for those who play aggressively, and upgrading to Faber pickup rings can optimise sound clarity and output. By incorporating Faber parts into your import guitar, you can dramatically elevate its quality and performance, making your playing experience more enjoyable.

Once you’ve completed your upgrades, be it upgrading with best tune o matic bridge or Gibson les paul bridge, maintaining your guitar becomes crucial. Regular maintenance can ensure that your instrument stays in top shape and that your upgrades continue to perform at their best.

Comments

How To Clean And Maintain Your Electric Guitar Fretboard

Finished and Unfinished Fretboards The guitar community is torn in a debate about whether the material of a fretboard makes any difference. Some believe that a rosewood fretboard is markedly different from ebony, while others say there’s hardly any difference. But when it comes to cleaning, you will need to be cautious. Primarily, the focus is on fretboard cleaning, but other guitar parts are involved, like the neck and tuning pegs. And if your electric guitar has a fretboard that uses unfinished wood, things are tricky, demanding extreme caution. So, it’s recommended to oil unfinished fretboards for obvious reasons. When you leave wood for a long time, it turns hard, thereby making it difficult for the truss rod-neck adjustment. Unoiled fretboards can also crack in places that look bad and hamper your guitar play. How To Start Cleaning Your FretBoard For maple fretboards, you don’t have to spend time oiling. Typically, they are pre-hydrat...

5 Gibson Guitars You Should Go For

Gibson SG is a model that was introduced in the year 1961. The splendid feature of this guitar is that it is lightweight. You can easily find the vintage Gibson guitar parts very easily for this one. It is made of mahogany wood which is quite durable and strong. It has a small and extra-thin neck that can be played by anyone. This increases the playability of the guitar in a big way. It is also cheaper than the previous Gibson models. The versatile design makes it repairable and parts for Gibson guitars are easily available. It also produces sounds that are fully balanced. However the joint on the neck is slightly weak that can affect sound quality. It can break easily and is fragile due to its super thin nature. The Les Paul model is the model that was released before the SG or Solid Guitar. This Ultima model from Les Paul is a little expensive and is a total vintage collection. These look classy, luxurious and has explicitly handcrafted features. It ha...

How to Repair Binding around the Body of an Acoustic Guitar

What is Acoustic Guitar Body Binding? Almost all acoustic guitars have some type of binding around the edges where the top and back meet the sides. Many acoustic guitars also have binding around the fretboard and peghead. Acoustic guitar binding can be made out of many different kinds of material including: various woods, plastic, or celluloid. A “true” binding around the body of the guitar is inlayed or glued in a channel cut from the body. A router is used to cut a small channel or shelf on the edges of the guitar for the binding to sit on. The binding is then bent and shaped to fit the body and glued in place. Most of the time decretory purfling strips are usually inlayed next to the binding. Purfling strips are thin laminate pieces of wood dyed different colors. You might ask, what is the purpose of binding on an acoustic guitar and why don’t all guitars have binding. Acoustic guitars have the edges bound to create stronger joints between the top, sides, and back of the...

Nethan Vines

Search This Blog