How to Properly String a Guitar with a Tune-O-Matic Bridge?

To date, the functionality and versatility of the Tune-o-Matic bridge make it stand as a hallmark of guitar engineering. The design of the TOM bridge has become synonymous with tone and stability, and even though it started as a Gibson design, it is now found in numerous guitar models across various brands. In this guide, we will take you through the intricacies of stringing a guitar equipped with a Tune-o-Matic bridge.

Importance of Proper Stringing

Stringing the guitar isn’t just some mundane ritual that guitarists do, it is an extremely crucial step that ensures that the guitar is properly tuned so you can sway your head along with it instead of covering your ears. The importance of stringing a guitar isn’t just limited to improved tuning for a longer period of time. Rather, it’s also essential for enhanced clarity and richness of the tune. So if you’re looking to improve your overall guitar-playing experience, stringing the guitar and equipping it with the best guitar parts is a must!

A Step-by-Step Guide to Properly Stringing a Guitar with a Tune-O-Matic Bridge

Preparation

Before you get to the real work, make sure your workspace is clean and not cluttered so that you can lay down your guitar in a stable position. Gather all your tools along with the string gauge and double-check them to avoid any mishaps.

Removing Old Strings

Start with carefully snipping off the old strings with the help of string cutters. Start with the low E string and work your way up to the high E. When the strings are snipped, dispose of them safely before proceeding to the next step.

Comments

How To Clean And Maintain Your Electric Guitar Fretboard

Finished and Unfinished Fretboards The guitar community is torn in a debate about whether the material of a fretboard makes any difference. Some believe that a rosewood fretboard is markedly different from ebony, while others say there’s hardly any difference. But when it comes to cleaning, you will need to be cautious. Primarily, the focus is on fretboard cleaning, but other guitar parts are involved, like the neck and tuning pegs. And if your electric guitar has a fretboard that uses unfinished wood, things are tricky, demanding extreme caution. So, it’s recommended to oil unfinished fretboards for obvious reasons. When you leave wood for a long time, it turns hard, thereby making it difficult for the truss rod-neck adjustment. Unoiled fretboards can also crack in places that look bad and hamper your guitar play. How To Start Cleaning Your FretBoard For maple fretboards, you don’t have to spend time oiling. Typically, they are pre-hydrat...

5 Gibson Guitars You Should Go For

Gibson SG is a model that was introduced in the year 1961. The splendid feature of this guitar is that it is lightweight. You can easily find the vintage Gibson guitar parts very easily for this one. It is made of mahogany wood which is quite durable and strong. It has a small and extra-thin neck that can be played by anyone. This increases the playability of the guitar in a big way. It is also cheaper than the previous Gibson models. The versatile design makes it repairable and parts for Gibson guitars are easily available. It also produces sounds that are fully balanced. However the joint on the neck is slightly weak that can affect sound quality. It can break easily and is fragile due to its super thin nature. The Les Paul model is the model that was released before the SG or Solid Guitar. This Ultima model from Les Paul is a little expensive and is a total vintage collection. These look classy, luxurious and has explicitly handcrafted features. It ha...

How to Repair Binding around the Body of an Acoustic Guitar

What is Acoustic Guitar Body Binding? Almost all acoustic guitars have some type of binding around the edges where the top and back meet the sides. Many acoustic guitars also have binding around the fretboard and peghead. Acoustic guitar binding can be made out of many different kinds of material including: various woods, plastic, or celluloid. A “true” binding around the body of the guitar is inlayed or glued in a channel cut from the body. A router is used to cut a small channel or shelf on the edges of the guitar for the binding to sit on. The binding is then bent and shaped to fit the body and glued in place. Most of the time decretory purfling strips are usually inlayed next to the binding. Purfling strips are thin laminate pieces of wood dyed different colors. You might ask, what is the purpose of binding on an acoustic guitar and why don’t all guitars have binding. Acoustic guitars have the edges bound to create stronger joints between the top, sides, and back of the...

Nethan Vines

Search This Blog