Build a Guitar Kit | Luthier Tips & Recommended Tools

When I first decided to build my first acoustic guitar from a guitar kit, I knew it was going to be a challenge. Looking back now, though, I realize that I didn’t have a clue what I was getting myself into.

Don’t get me wrong…I am LOVING putting this acoustic guitar together! So far it’s been an amazing experience. However, considering I have little instrument-building experience, I feel like I’m a blind man trying to get through a maze.

That’s why I solicited the help of my friend Dave Appel, owner of Scanlon Bros Guitars. I realized that I would learn so much more from this experience if I had the assistance of an experienced luthier like Dave instead of fumbling around by myself.

I’d like to share with you some of the things I learned from Dave. I do this in hope that you can enjoy the guitar-building process as much as I have.

5 Tips for Building a Guitar from Kit

If I could boil down what I’ve learned over the past couple months into 5 useful tips, here’s what I would tell you:

Don’t Do it Alone!
Not only is it more fun to do this project together with somebody, it also helps if that second person has a little experience. I would go so far as to recommend that you seek out a luthier who offers to mentor and guide you on your build, similar to what I did with Dave of Scanlon Bros Guitars.
Buy Pre-Shaped Parts
This is especially true if this is your first guitar kit. Whether it’s the sides of your guitar being pre-bent or the bracing being pre-shaped, I highly recommend giving yourself a break by allowing the professionals to do this for you. I first purchased my bracing from Luthiers Mercantile International and it arrived as three big blocks of wood. I was quick to get back on their website and order pre-shaped bracing since I didn’t have the patience to carve the bracing.
Set Expectations
The best way to enjoy your guitar build is to set your expectations well. According to my luthier friend Dave, who has put together a number of different guitars over the years, he is able to assemble a guitar kit in just a couple weeks but it takes an additional 4-6 weeks to apply the finish. If you’re a beginner who is only doing this on the side, consider double or tripling that time period.
Research, Research, Research
Before you get started and even while you’re putting the guitar together, it’s a great idea to continue your research by reading books, watching videos and talking with other luthiers. Many times I found during my research that I would get answers to questions I didn’t even know I should be asking.
Watch Your Humidity
I thought I had good control over the environment where I was building my guitar. Then I noticed that my sitka spruce top was beginning to bow…nooooo!! I had to quickly adjust my humidity in the shop where I was working and make sure that I was carefully watching my external environment.

Recommended Luthier Tools for Guitar Kits

Instead of diving into a list of recommended luthier tools that make building a guitar from a kit so much easier, I suggest you take a look at the following video where Dave Appel from Scanlon Bros Guitars walks us through his shop to discuss which tools are absolutely necessary and which you can do without.

Luthiers Mercantile International: This is where I bought my kit and I’ve been pleased with the quality.
Stewart MacDonald: Another favorite place to buy tools for many luthiers.

Conclusion | Guitar Kit Tips & Tools

As always, make sure you continue to do your research before you jump into building your own guitar. A lot of headache and hassle can be avoided that way! “How to adjust your guitar bridge” is one of the most occurring questions that arise after buying and installing a Faber® Tone-Lock™ bridge.

Are you building your own guitar from a kit right now? FaberUSA, the online store of guitar parts, offering best tuneomatic bridge, parts for Gibson, Epiphone and many other brands.

Source Link – http://www.guitaradventures.com/build-a-guitar-kit-tips-and-tools#comment-489299

How To Clean And Maintain Your Electric Guitar Fretboard

Finished and Unfinished Fretboards The guitar community is torn in a debate about whether the material of a fretboard makes any difference. Some believe that a rosewood fretboard is markedly different from ebony, while others say there’s hardly any difference. But when it comes to cleaning, you will need to be cautious. Primarily, the focus is on fretboard cleaning, but other guitar parts are involved, like the neck and tuning pegs. And if your electric guitar has a fretboard that uses unfinished wood, things are tricky, demanding extreme caution. So, it’s recommended to oil unfinished fretboards for obvious reasons. When you leave wood for a long time, it turns hard, thereby making it difficult for the truss rod-neck adjustment. Unoiled fretboards can also crack in places that look bad and hamper your guitar play. How To Start Cleaning Your FretBoard For maple fretboards, you don’t have to spend time oiling. Typically, they are pre-hydrat...

5 Gibson Guitars You Should Go For

Gibson SG is a model that was introduced in the year 1961. The splendid feature of this guitar is that it is lightweight. You can easily find the vintage Gibson guitar parts very easily for this one. It is made of mahogany wood which is quite durable and strong. It has a small and extra-thin neck that can be played by anyone. This increases the playability of the guitar in a big way. It is also cheaper than the previous Gibson models. The versatile design makes it repairable and parts for Gibson guitars are easily available. It also produces sounds that are fully balanced. However the joint on the neck is slightly weak that can affect sound quality. It can break easily and is fragile due to its super thin nature. The Les Paul model is the model that was released before the SG or Solid Guitar. This Ultima model from Les Paul is a little expensive and is a total vintage collection. These look classy, luxurious and has explicitly handcrafted features. It ha...

How to Repair Binding around the Body of an Acoustic Guitar

What is Acoustic Guitar Body Binding? Almost all acoustic guitars have some type of binding around the edges where the top and back meet the sides. Many acoustic guitars also have binding around the fretboard and peghead. Acoustic guitar binding can be made out of many different kinds of material including: various woods, plastic, or celluloid. A “true” binding around the body of the guitar is inlayed or glued in a channel cut from the body. A router is used to cut a small channel or shelf on the edges of the guitar for the binding to sit on. The binding is then bent and shaped to fit the body and glued in place. Most of the time decretory purfling strips are usually inlayed next to the binding. Purfling strips are thin laminate pieces of wood dyed different colors. You might ask, what is the purpose of binding on an acoustic guitar and why don’t all guitars have binding. Acoustic guitars have the edges bound to create stronger joints between the top, sides, and back of the...

Nethan Vines

Search This Blog