Skip to main content

Different Types Of Guitar Bridges You Must Know

 

At times your guitar might give some trouble and then comes the time to upgrade and customize your guitar. Some professionals also do it for better sound quality and playing experience. The major issue which most of the people face is with the name of the guitar parts. These guitar terms can be confusing at times. You need to know the names correctly to replace or repair them. You need to source the right parts as well so there is no challenge.

Have you heard the term “Tune-o-Matic”? It is quite common and this actually describes the bridge system which is like the Gibson style. It will help in adjusting the saddles individually for every string. Now the user can work on the intonation of every string distinctly. So here we will talk about the Guitar Bridges of different types so you can understand the difference and make a choice.

The ABR Bridges are classic style bridges. You will notice an ABR bridge in the Les Paul Reissue or a custom shop guitar or a vintage type guitar. There are 6 to 32 threaded rods in the bridge posts and these are screwed to the body wood directly. The thumbwheel is a separate part of the post and this is placed properly so the bridge can sit on it without any issues. Now, when the thumbwheel is moved up and down, the bridge moves along. Many guitar players like this style bridge and this configuration is on the vintage and vintage reissue Gibson style guitars which can be seen visually and functionally.

The Nashville Bridges are just like ABR and you will notice them in many Gibson guitars which are ABR-1 equipped. The difference between both the bridges is the width and the way in which they mount to the body. There is a bridge post on the Nashville bridge which is connected to the metal body bushing with the help of screws via an integrated thumbwheel. When the thumbwheel is turned height adjustment is made and the thumbwheel helps in moving the complete assembly up and down.

Wraparound Bridges are not like the Tune o Matic style bridge and it is like a tailpiece and bridge in one single unit. If you have a vintage guitar then you will have the wraparound bridge and it will look like a tailpiece. That kind of wraparound will evolve in something known as compensated or the lightning bolt design for giving better intonation. Faber gives Tone-Bar or TPWC wraparounds lightweight aluminium wraparounds bridges. The TPW wrap looks like the50’s style original wraparound and this is used by many players for better intonation and it also preserves the original vintage taste. 

SO, these are the three types of guitar bridges which you should know so you can repair and replace them whenever there is a need.
Read More: https://www.apsense.com/article/different-types-of-guitar-bridges-you-must-know.html

Labels:

Comments

Post a Comment

Popular posts from this blog

How To Clean And Maintain Your Electric Guitar Fretboard

  Finished and Unfinished Fretboards  The guitar community is torn in a debate about whether the material of a fretboard makes any difference. Some believe that a rosewood fretboard is markedly different from ebony, while others say there’s hardly any difference. But when it comes to cleaning, you will need to be cautious. Primarily, the focus is on fretboard cleaning, but other  guitar parts   are involved, like the neck and tuning pegs. And if your electric guitar has a fretboard that uses unfinished wood, things are tricky, demanding extreme caution. So, it’s recommended to oil unfinished fretboards for obvious reasons. When you leave wood for a long time, it turns hard, thereby making it difficult for the truss rod-neck adjustment.  Unoiled fretboards can also crack in places that look bad and hamper your guitar play. How To Start Cleaning Your FretBoard  For maple fretboards, you don’t have to spend time oiling. Typically, they are pre-hydrated with carnauba wax that wicks away ex
Post a Comment
Read more

5 Gibson Guitars You Should Go For

  Gibson SG is a model that was introduced in the year 1961. The splendid feature of this guitar is that it is lightweight. You can easily find the  vintage Gibson guitar parts  very easily for this one. It is made of mahogany wood which is quite durable and strong. It has a small and extra-thin neck that can be played by anyone. This increases the playability of the guitar in a big way. It is also cheaper than the previous Gibson models. The versatile design makes it repairable and   parts for Gibson guitars   are easily available. It also produces sounds that are fully balanced. However the joint on the neck is slightly weak that can affect sound quality. It can break easily and is fragile due to its super thin nature. The Les Paul model is the model that was released before the SG or Solid Guitar. This Ultima model from Les Paul is a little expensive and is a total vintage collection. These look classy, luxurious and has explicitly handcrafted features. It has a good sound capacity
Post a Comment
Read more

How to Repair Binding around the Body of an Acoustic Guitar

What is Acoustic Guitar Body Binding? Almost all acoustic guitars have some type of binding around the edges where the top and back meet the sides. Many acoustic guitars also have binding around the fretboard and peghead. Acoustic guitar binding can be made out of many different kinds of material including: various woods, plastic, or celluloid. A “true” binding around the body of the guitar is inlayed or glued in a channel cut from the body. A router is used to cut a small channel or shelf on the edges of the guitar for the binding to sit on. The binding is then bent and shaped to fit the body and glued in place. Most of the time decretory purfling strips are usually inlayed next to the binding. Purfling strips are thin laminate pieces of wood dyed different colors. You might ask, what is the purpose of binding on an acoustic guitar and why don’t all guitars have binding. Acoustic guitars have the edges bound to create stronger joints between the top, sides, and back of the
1 comment
Read more