Skip to main content

How to Repair Binding around the Body of an Acoustic Guitar

What is Acoustic Guitar Body Binding?

Almost all acoustic guitars have some type of binding around the edges where the top and back meet the sides. Many acoustic guitars also have binding around the fretboard and peghead. Acoustic guitar binding can be made out of many different kinds of material including: various woods, plastic, or celluloid.
A “true” binding around the body of the guitar is inlayed or glued in a channel cut from the body. A router is used to cut a small channel or shelf on the edges of the guitar for the binding to sit on. The binding is then bent and shaped to fit the body and glued in place. Most of the time decretory purfling strips are usually inlayed next to the binding. Purfling strips are thin laminate pieces of wood dyed different colors.
You might ask, what is the purpose of binding on an acoustic guitar and why don’t all guitars have binding. Acoustic guitars have the edges bound to create stronger joints between the top, sides, and back of the guitar. The binding acts almost as a brace around the outside of the guitar.
It protects the fragile, grain edges of the top and back while helping attach them to the sides. Binding is important structurally and aesthetically. Your choice of binding can change the entire look of your guitar. Pearloid or celluloid binding will give the guitar a completely different look than wood binding. Solid binding also helps produce good tone. Read For More Information - https://www.guitarrepairbench.com/acoustic-guitar-repairs/body-binding/#comment-724

Comments

  1. SOLO Music GearJuly 1, 2022 at 6:28 AM

    This is a really good blog wish more people would read this , you offer some really good suggestions on Guitar Repair. Thanks for sharing.

    ReplyDelete

Post a Comment

Popular posts from this blog

How To Clean And Maintain Your Electric Guitar Fretboard

  Finished and Unfinished Fretboards  The guitar community is torn in a debate about whether the material of a fretboard makes any difference. Some believe that a rosewood fretboard is markedly different from ebony, while others say there’s hardly any difference. But when it comes to cleaning, you will need to be cautious. Primarily, the focus is on fretboard cleaning, but other  guitar parts   are involved, like the neck and tuning pegs. And if your electric guitar has a fretboard that uses unfinished wood, things are tricky, demanding extreme caution. So, it’s recommended to oil unfinished fretboards for obvious reasons. When you leave wood for a long time, it turns hard, thereby making it difficult for the truss rod-neck adjustment.  Unoiled fretboards can also crack in places that look bad and hamper your guitar play. How To Start Cleaning Your FretBoard  For maple fretboards, you don’t have to spend time oiling. Typically, they are pre-hydrat...
Post a Comment
Read more

5 Gibson Guitars You Should Go For

  Gibson SG is a model that was introduced in the year 1961. The splendid feature of this guitar is that it is lightweight. You can easily find the  vintage Gibson guitar parts  very easily for this one. It is made of mahogany wood which is quite durable and strong. It has a small and extra-thin neck that can be played by anyone. This increases the playability of the guitar in a big way. It is also cheaper than the previous Gibson models. The versatile design makes it repairable and   parts for Gibson guitars   are easily available. It also produces sounds that are fully balanced. However the joint on the neck is slightly weak that can affect sound quality. It can break easily and is fragile due to its super thin nature. The Les Paul model is the model that was released before the SG or Solid Guitar. This Ultima model from Les Paul is a little expensive and is a total vintage collection. These look classy, luxurious and has explicitly handcrafted features. It ha...
Post a Comment
Read more